Description
The Atosa MBF8507GR is a two-section, bottom-mount commercial reach-in refrigerator built for high-volume restaurant and foodservice operations that need reliable, accessible cold storage on the line or in a prep area. At 46.77 cu ft across two independently locked solid doors, it holds a substantial amount of product without requiring a dedicated walk-in.
- Two-section commercial reach-in refrigerator with bottom-mount self-contained refrigeration, suited for hot cooking line environments where a top-mount compressor would be exposed to overhead heat; compressor placement at the base also simplifies routine service and coil cleaning
- Stainless steel interior and exterior construction with a galvanized steel back; six epoxy-coated wire shelves (three per section, part number W0402387) resist rust and corrosion in humid kitchen environments
- 46.77 cu ft capacity in an exterior footprint of 54.4″ W x 31.7″ D x 83.1″ H; ships with four 4″ pre-installed casters for floor-level mobility and repositioning; interior width is 49-5/8″
- Runs on standard 115V/60Hz/1-phase power at 3.2 amps with a NEMA 5-15P plug; no dedicated circuit or special wiring required for most commercial kitchen installations
- Air defrost with automatic evaporation eliminates manual defrost tasks; down-duct refrigeration distributes air evenly throughout the cabinet; solid swing doors self-close below 90 degrees and stay open past 90 degrees for hands-free loading
- Dixell digital controller maintains 33°F to 40°F; recessed door handles reduce snagging in tight kitchen corridors; standard door locks on both sections secure contents during off-hours; unit weight is 452 lbs gross
- cETLus certified for electrical safety in the US and Canada
- ETL-Sanitation certified for commercial foodservice sanitation standards
- ENERGY STAR certified; R290 hydrocarbon refrigerant with 1/5 HP variable-capacity compressor
Dimensions: 54.4″ W x 31.7″ D x 83.1″ H
Reviews
There are no reviews yet.